Usefulness will be primarily limited by where the screw is located. A lot of fasteners are laterally very close to something that will interfere with the large grip to make a straight-on approach impossible. That said, for a heck of a lot of stuff, this looks pretty good for the light-duty user.
That said, where are the rest of the 14 bits per screwdriver? I’m not seeing anything like that many in the photos.
@chienfou@troy In that image, I see four slotted bits, not three. It’s possible that the one obscured by a finger might be a Posi, and it’s possible that the one being gripped mught also be a Posi, but that still doesn’t add up to what’s given. Is this photo (which does show 14, yes) not accurate as to what’s actually included? Looking at another of them, that seems likely. But it would be really helpful to have the Torx and hex bit sizes, since that makes a big difference in the specific utility of such a tool.
@troy@werehatrack
yeah, seems they randomly put bits into the holder for that LAST image. I think the other 2 clearly show the correct bit counts and styles image #1 and #4. But you are correct without sizes it’s hard to get too excited about this deal (a point made 12 hours earlier by zebaxga in the post below).
What are the specific sizes of bits or where can I find that info? So far all the torx bits/screwdrivers I’ve been finding are too small for what I need.
What’s Included?
Warranty
90 days
Estimated Delivery
Monday, Dec 1
Usefulness will be primarily limited by where the screw is located. A lot of fasteners are laterally very close to something that will interfere with the large grip to make a straight-on approach impossible. That said, for a heck of a lot of stuff, this looks pretty good for the light-duty user.
That said, where are the rest of the 14 bits per screwdriver? I’m not seeing anything like that many in the photos.
@werehatrack There are 7 bits on each side
@troy @werehatrack
Yeah…I agree with @troy. I can see them in about half of the images. Of course they are not visible from certain angles …
@chienfou @troy In that image, I see four slotted bits, not three. It’s possible that the one obscured by a finger might be a Posi, and it’s possible that the one being gripped mught also be a Posi, but that still doesn’t add up to what’s given. Is this photo (which does show 14, yes) not accurate as to what’s actually included? Looking at another of them, that seems likely. But it would be really helpful to have the Torx and hex bit sizes, since that makes a big difference in the specific utility of such a tool.
@troy @werehatrack
yeah, seems they randomly put bits into the holder for that LAST image. I think the other 2 clearly show the correct bit counts and styles image #1 and #4. But you are correct without sizes it’s hard to get too excited about this deal (a point made 12 hours earlier by zebaxga in the post below).
@werehatrack 14 bits in one screwdriver, 28 bits in two
What are the specific sizes of bits or where can I find that info? So far all the torx bits/screwdrivers I’ve been finding are too small for what I need.
@zebazga
Good point.